Kitchen visits in and around Seattle: 8:00 am – 8:00 pm, seven days Ring (206) 339-4211 at any hour — the line is staffed 24/7 $89 to diagnose, and it comes back off an approved repair Six price bands published before you pick up the phone Ranges, wall ovens, cooktops, rangetops and hoods — Wolf only Independent: no dealer, no manufacturer tie
Wolf Repair Seattle · WA — home (206) 339-4211
Menu

Coverage · North Seattle · 98103

Wolf Range Repair in Wallingford

Conditions here

  • Air Steam and grease every night A kitchen used daily puts steam and grease into the air, and both settle on burner ports and electrode tips.
  • Building Craftsman bungalows Many kitchens were rebuilt around a modern range inside a house wired long before that range existed.
  • Access Street parking, porch steps Most visits start with a short walk and a few steps up to the front door, which sets how parts are carried in.
Cast-iron grates on a gas range with one burner base exposed, oven door open and a rack propped alongside

Wallingford’s kitchens get cooked in: a bungalow household using its range every evening puts a great many starts on the same two or three burners. Grease, steam and boil-overs reach the ports and the electrode tips sooner in a kitchen like that, and the symptoms arrive as a burner that hesitates, clicks twice before it catches, or will not hold a low flame. Wolf Repair Seattle, (206) 339-4211, starts with the burner the household actually uses most and works back from the cap to the valve.

Worn, not broken

A burner that has simply worked hard often needs cleaning and a correctly seated cap rather than parts. When it does need parts, the valve and orifice behind the knob are the usual candidates, and the burner valve and orifice cost page shows that band. Everything else on the range is covered on our range repair page.

Part of North Seattle

Wallingford is part of North Seattle, and its neighbour to the west, Fremont, trades bungalows for townhomes with shared walls — so the first question there is the hood duct, not the wiring.

In their words

Told by the people who paid for them

4.9 / 51,093 reviews

  • The induction zone kept quitting under my stock pot. Its cooling fan was packed solid with grease. Cleaned, tested, and he explained what to watch for rather than selling me a board.

    Janine P.WallingfordNov 2025

  • Only the right pair of lights worked, and they flickered. Corroded sockets after years of steam, not the transformer. He replaced both holders and cleaned the grease trough while the baffles soaked.

    Tamar E.TangletownJul 2025

  • Clicking carried on well after the flame was up, all night if you let it. A spark switch under the knob had stuck closed from an old boil-over. Quiet ever since.

    Zeke H.WallingfordJun 2025