Kitchen visits in and around Seattle: 8:00 am – 8:00 pm, seven days Ring (206) 339-4211 at any hour — the line is staffed 24/7 $89 to diagnose, and it comes back off an approved repair Six price bands published before you pick up the phone Ranges, wall ovens, cooktops, rangetops and hoods — Wolf only Independent: no dealer, no manufacturer tie
Wolf Repair Seattle · WA — home (206) 339-4211
Menu

Cost · Seattle, WA

Repair a Wolf Range or Buy New? The Seattle Numbers

Igniter or spark module
$170–$420
Burner valve or orifice service
$230–$640
Oven thermostat or sensor calibration
$220–$460
Convection fan or motor
$280–$670
Control board or touch panel
$440–$950
Door hinge, glass or seal
$280–$690

Call-out One $89 charge covers getting a technician to your kitchen and diagnosing the fault in full; approve the repair and that $89 comes off its price.

Set any one band above against the price of a new professional range and a single repair is usually the smaller number by a wide margin. Wolf Repair Seattle, (206) 339-4211, gives you the one figure that matters for the decision after the $89 diagnosis, and says so plainly when several parts have failed at once and buying new deserves a serious look.

Seven-knob pro-style stainless range beside a window, oven empty with its fan cover showing, rack propped on the floor against the wall

Reading the two numbers

The bands above cover one job each: a spark module, a valve, a sensor, a fan, a board or a door. The comparison printed further down is for the range alone, before anyone installs it or touches the ventilation. For most faults the gap between the two is the whole answer, and the checks that find which band applies are on our Wolf range repair page.

When new is the honest answer

It is when the diagnosis finds several failures at once, or damage no part can undo. A 48-inch range in a view kitchen, the kind common in Washington Park, can justify a bigger repair than a smaller range would, because its replacement also means reworking the space around it.

Either way the decision starts with one diagnosed figure, and what the visit that produces it covers is on the service call page.

What moves the final figure

How many parts have failed
One worn part is a repair; three failing together can add up to a figure worth setting against a new range.
Damage beyond the parts
A cracked cooktop surface, a warped oven cavity or heavy corrosion changes the question from which part to whether the range is worth it.
What a new range brings with it
The replacement figure below covers the range only; fitting it, the gas and power connections and any change to the hood are extra work on top.

Against buying new Retiring it instead means $8,010–$16,950 — the going rate for a comparable professional range, before installation and ventilation work — so the band above is the number to set against that one.

In their words

Told by the people who paid for them

4.9 / 51,347 reviews

  • Blower hummed but the smoke just sat over the cooktop. The roof cap flap was gummed shut and the baffles were solid. Cleaned both, and a tissue holds flat on the intake now.

    Kwame B.WallingfordJun 2026

  • Simmer on the front burner had been useless since we moved in. He set the low-flame screw properly and read the manifold pressure. It holds a low flame now. Small job, treated seriously.

    Russ K.BallardJan 2026

  • Convection fan rattled, then stopped halfway through a bake. The bearing had failed and a blade was catching the shroud. New motor, and the noise is gone.

    Cleo B.Capitol HillJun 2026

Book it

Tell us the model number and what it is doing

Our kitchen visits keep to 8:00 am – 8:00 pm, seven days, across the city and past its edges, while (206) 339-4211 stays staffed 24/7. The $89 diagnosis is known before anyone sets off, and it is credited back once you approve the repair.

Oven door open on an empty cavity with the bake element across the floor, gas cooktop above